How to USB Your Behringer Guitar
1. Insert your included Driver and Application CD into your CD / DVD – ROM. Plug your guitar’s USB interface to your computer’s USB interface.
2. You do not need any power, USB cable will supply power from your computer to your guitar. If USB connected, the blue light will turn on. After USB connected, your computer will install new hardware device driver. Allow your computer to install the hardware device driver. After installation completed, please disconnect your USB cable.
3. Now you need to install the guitar’s driver. Find the folder “Driver” from your installation CD and find “setup.exe” filename. Run it and follow the instructions.
4. Install the included software from your installation CD. Find file “setup.exe” in folder “NI Guitar Combos. Run it and follow the instructions.
5. Configure the software and try to play your guitar.
For more detail installations please look this guidelines.
Troubleshootings
ISSUE: USB AUDIO Codec not recognized by Windows; no entry for USB AUDIO Device in Windows Device Manager
# Check USB connection, if possible try different USB cable or USB port.
# Connect iAXE guitar directly to computer, not via USB hub.
# Ensure that USB port is functional (does it work with digital camera, printer, etc.?).
# If necessary, check that USB ports are activated in host system BIOS.
ISSUE: Windows driver installation not completed (for example, Windows error code 10, error code 39)
# Check USB connection, if possible try different USB cable or USB port.
# Connect iAXE guitar directly to computer, not via USB hub.
# If possible, try to install on another computer.
ISSUE: During installation, warning is displayed “target file exists and is newer than the source”
# Choose option “Overwrite newer file”.
ISSUE: Installation of BEHRINGER USB AUDIO driver failed with “Error 0×0006”
# Check USB connection, if possible try different USB cable or USB port.
# Close application, re-run the BEHRINGER USB AUDIO setup.exe file from CD-ROM.
# Download fresh ASIO driver files from www.behringer.com
ISSUE: ASIO-USB Control Panel 2.7.8 does not show BEHRINGER USB AUDIO as Device
# Check USB connection, if possible try different USB cable or USB port.
# Connect iAXE guitar directly to computer, not via USB hub.
# Close application, reinstall ASIO driver (BEHRINGER USB AUDIO setup.exe file) and try again.
ISSUE: Latency time too long
# Reduce latency setting.
# Start “ASIO-USB Control Panel 2.7.8” from within audio software (called “ASIO configuration” or similar).
# Set USB Device to BEHRINGER USB AUDIO.
# Click on ASIO tab.
# Set System Performance to “Rapid” (or even “High speed”).
ISSUE: Clicks or dropouts in recording (latency time too short)
# Increase latency setting.
# Start “ASIO-USB Control Panel 2.7.8” from within audio software (may be called “ASIO
configuration” or similar).
# USB Device = BEHRINGER USB AUDIO.
# Click on ASIO tab.
# Set System Performance to Normal.
Incoming search terms for the article:
- asio usb control panel
- asio-usb control panel
- usb guitar cable no driver in cubase
- usb guitar automatic driver installation problem
- iaxe guitar recording ok but no sound
- how to connect cubase to ni guitar combo
- guitar construction usb interface
- correct ASIO settings for the IAXE393 usb
- connect USB audio codec to mac with guitar
- connect behringer guitar to guitar rig 3
Katja:
Hello,
I just bought that Behringer USB white guitar and here’s what i encounter:
I have a MOTU ultralight soundcard, which obviously i want to use (in Cubase).
I have guitar rig 3 installed.
I plugged the usb cable (directly into my mac’s usb port) and in the guitar, of course.
I installed the combo stuff on my mac (is there any other way of installing the driver?)
I open the Audio midi control panel.
I select properties for Behringer’s audio driver
I select configure device and check my MOTU soundcard (i guess it’s then routing the sound to the MOTU)
I open guitar rig in stand alone first.
I choose the Behringer audio driver.
I play …
no sound.
ok, now i’m thinking maybe the routing thing didn’t work, let’s first test just with the behringer audio driver all the way. (even though there’s no way that i will want to work in cubase with that audio driver, are we clear?)
anyway for the test purpose, i go back to my audio midi setup, select the behringer stuff everywhere. .. go back to guitar rig. no sound.
So i think maybe i should first try with their guitar combo demos … well no sound …
HELP!!!!
What am i missing?
any idea?
thanks for any clue …
25 May 2009, 11:59 pmregards,
k